The Nyxtronics 4-in-1 ESC AM32 75A 6S is a single-board speed controller running open-source AM32 firmware, built for high-performance FPV quadcopters. It drives all four motors at 75A continuous on up to 6S LiPo, with a dual-MOSFET power stage for sustained high-current operation. AM32 is officially supported in the AM32 Configurator for straightforward setup and tuning.
Key Features
- 4-in-1 ESC with four independent motor outputs on a single board
- 75A continuous current per output
- 3–6S LiPo input voltage range
- AM32 open-source firmware, officially supported in the AM32 Configurator
- Dual-MOSFET power stage architecture for high-current operation
- Part of a product line offered in 50A / 75A 6S and 80A 8S configurations
- WCO (Western Components Only) and Standard component sourcing options
Specifications
| Spec | Value |
|---|---|
| Type | 4-in-1 ESC (4 motor outputs) |
| Continuous current | 75A |
| Input voltage | 3–6S LiPo |
| Firmware | AM32 (open-source, supported in AM32 Configurator) |
| Power stage | Dual-MOSFET architecture |
| Product line configurations | 50A / 75A 6S and 80A 8S |
| Component sourcing | WCO (Western Components Only) / Standard |
Sourcing Options
This 4-in-1 ESC is available in two component sourcing tiers. WCO (Western Components Only) builds use components sourced exclusively from Western suppliers, intended for builders with supply-chain or origin requirements. The Standard option uses the regular component sourcing for the same board. Both share identical electrical specifications — the 75A, 6S, AM32, dual-MOSFET configuration above — and differ only in component sourcing.