Nyxtronics 4-in-1 ESC AM32 50A 8S

Description

COMING SOON
Elevate your performance with our Nyxtronics 4-in-1 ESC based on AM32 firmware.

ESC provides 4 motor outputs and can work with 3-8s Lipo battery input. With a 50A continuous current output, your motors will operate at peak performance, giving you the edge in speed and power.

AM32 is designed to specifically work with 32-bit processors. It gives more advantages than using other ESCs:

•  Utilizes 32-bit microcontrollers, which provide significantly more processing power. This allows for more complex calculations and algorithms, resulting in smoother and more precise control of the motors.
• Offers faster response times and improved performance due to their ability to handle higher frequencies and more data at once. This results in better motor responsiveness and smoother throttle control.
• More efficient in handling power and generating less heat due to their advanced processing capabilities and optimized firmware. This results in better overall performance and longevity of the ESC.
• Supports more advanced features including: telemetry, RPM filtering, dynamic notch filtering, and advanced motor timing adjustments.
• Provides extensive options for customization and tuning through their advanced firmware. Users can fine-tune parameters to optimize performance for specific applications.

To configure AM32 and upload firmware you can use the Multi_ESC config tool using Betaflight passthrough. They can be downloaded for: WINDOWS or LINUX
Alternately you can use the Online-ESC Configurator to flash or change settings with any web browser that supports web serial.

The ESC is expected to be stacked with our Nyxtronics flight controllers.

Product specifications:
Firmware: AM32.
ESC protocol: DSHOT300/600.
Power input: 3-8s Lipo.
Current sensor: Yes (Scale=100, Offset=0)
ESC telemetry: Yes (KISS).
Mounting: 30.5mm x 30.5mm (4mm hole diameter).
Dimensions: 47.6 mm x 45.6 mm x 6.5 mm

What you will get?

1. Nyxtronics 4-in-1 ESC AM32 50A 8S
2. Low ESR 35V 1000uF capacitor.
3. Silicone shock absorbers M3 x 6.5 4pcs.
4. XT60 power cable 100mm.
5. FC-ESC 8 pin connector.